Month: November 2026

FROM ORE TO ENERGY · PART 5

Fuel in the Reactor

During operation, fission, neutron capture and radioactive decay change the isotopic composition of the fuel. Burnup measures the thermal energy produced per unit initial mass of heavy metal, but does not fully describe the fuel’s condition; the core neutron balance, power distribution and condition of the fuel rods must also be considered. After discharge, the fuel still contains uranium and fissile isotopes, and its radionuclide inventory continues to change during cooling. Decay heat, radiation source terms and the remaining fissile inventory determine the requirements for cooling, shielding, confinement of radioactive material and maintenance of subcriticality.

Read More

From Indication to Plant State

A correct indication does not in itself ensure a correct interpretation of system state. Using steam generator level, pressurizer level and primary coolant activity as examples, this article examines the physical interpretation of measurements, the limitations of the measurement chain and the scope of conclusions that the data support in operational assessment.

Read More

When a fuel rod develops a leak

In a pressurized water reactor, even a small fuel rod leak can change the radionuclide composition of the primary coolant before the fuel becomes accessible for direct inspection. Assessing cladding condition requires relating isotopic composition, activity levels and their time histories to the operating history. Analysis of damage mechanisms and correlation of radiochemical measurements with outage inspections allow the fuel condition to be verified in stages and support operating decisions.

Read More