Reactor Systems

FROM ORE TO ENERGY · PART 5

Fuel in the Reactor

During operation, fission, neutron capture and radioactive decay change the isotopic composition of the fuel. Burnup measures the thermal energy produced per unit initial mass of heavy metal, but does not fully describe the fuel’s condition; the core neutron balance, power distribution and condition of the fuel rods must also be considered. After discharge, the fuel still contains uranium and fissile isotopes, and its radionuclide inventory continues to change during cooling. Decay heat, radiation source terms and the remaining fissile inventory determine the requirements for cooling, shielding, confinement of radioactive material and maintenance of subcriticality.

Read More

From Indication to Plant State

A correct indication does not in itself ensure a correct interpretation of system state. Using steam generator level, pressurizer level and primary coolant activity as examples, this article examines the physical interpretation of measurements, the limitations of the measurement chain and the scope of conclusions that the data support in operational assessment.

Read More

When Braking Causes Acceleration

In the original RBMK design, initial insertion of fully withdrawn control and safety rods could introduce positive reactivity locally. Drawing on INSAG-7, this article examines the physics of positive SCRAM, its relationship to void reactivity, and the design changes after Chernobyl, focusing on the reliability of the shutdown function.

Read More

CONTAINMENT SERIES · PART 5

How Integrity and Leak Tightness Are Actually Demonstrated

Successful leak testing is not the only evidence that a containment system will retain its function under demanding conditions. The publicly documented example of Krško Nuclear Power Plant shows how structural integrity and leak tightness are verified through inspections, local tests, corrective actions and traceable records.

Read More

CONTAINMENT SERIES · PART 4

Hydrogen Is Not Just a Matter of Pressure

Steam condensation in containment helps reduce pressure, but it does not remove hydrogen. The hydrogen fraction in the gas mixture may even increase. Part 4 of the series explains hydrogen generation, spatial distribution and the different ways in which the hazard is managed.

Read More

CONTAINMENT SERIES · PART 3

What Happens Inside Containment During a LOCA

During a LOCA, the containment system receives mass and energy released from the damaged reactor coolant system. This article follows the initial pressure response, condensation, water collection, recirculation and long-term heat removal across different containment designs.

Read More

CONTAINMENT SERIES · PART 2

Same Function, Different Outline

In a typical pressurised water reactor with a large dry containment, a substantial containment volume surrounds a spatially distributed reactor coolant system. In boiling water reactors with Mark I or Mark II containment systems, steam is routed to a water pool, where condensation limits the pressure rise. The difference is not an architectural peculiarity. It is a consequence of the reactor design, the postulated release of mass and energy, and the selected method of controlling pressure under accident conditions.

Read More